View 7P012FLA312I15_3787932.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

pcmcia flash memory card fla series 1 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. pcmcia flash memory card 1 megabyte through 40 megabyte (intel/sharp based) features low cost high density linear flash card supports 5v only systems or 5v systems with 12v vpp based on intel/sharp flashfile components fast read performance - 150ns or 200ns maximum access time x8 / x16 data interface high performance random writes - 8s typical word write time automated write and erase algorithms - command user interface 100,000 erase cycles per block 64k word symmetrical block architecture pc card standard type i form factor general description wedc?s fla series flash memory cards offer high density linear flash solid state storage solutions for code and data storage, high performance disk emulation and execute in place (xip) applications in mobile pc and dedicated (embedded) equipment. fla series cards conform to pcmcia international standard. the card?s control logic provides the system interface and controls the internal flash memories. card can be read/written in byte-wide or word-wide mode which allows for exible integration into various systems. combined with le management software, such as flash translation layer (ftl), fla flash cards provide removable high- performance disk emulation. the fla series offers low power modes controlled by registers. standard cards contain separate 2kb eeprom memory for card information structure (cis) which can be used for easy identi cation of card characteristics. the wedc fla series is based on intel/sharp flash memories. note: standard options include attribute memory. cards without attribute memory are available. cards are also available with or without a hardware write protect switch. architecture overview wedc?s fla series is designed to support from 2 to 20, 4mb, 8mb or 16mb components, providing a wide range of density options. cards are based on the 28f008sa (8mb) for 12v vpp applications or on the 28f004s5 (4mb), 28f008s5 (8mb) and 28f016s5 (16mb) devices for 5v only applications. devices codes for the 28f004s5, 28f008sa, 28f008s5 and the 28f016s5 are: a7h, a2h, a6h and aah respectively. systems should be able to recognize all four codes. cards utilizing the 8mb components provide densities ranging from 2mb to 20mb in 2mb increments, cards utilizing 16mb components provide densities ranging from 4mb to 40mb in 4mb increments. 4 mbit memory devices are used only for smallest capacity cards (1mb). in support of the pc card 95 standard for word wide access devices are paired. therefore, the flash array is structured in 64k word (128kbytes) blocks. write, read and block erase operations can be performed as either a word or byte wide operation . by multiplexing a 0 , ce 1# and ce 2 ,# 8-bit hosts can access all data on data lines dq 0 -dq 7 . the fla21-fla36 series also supports the following pcmcia compatible register functions: soft reset via the con guration option register, power down (sleep mode) via the con guration and status register and monitoring of ready/busy, soft reset and power down via the card status register (cards without attribute memory and versions fla51 - fla66 do not have registers). the fla series cards conform with the pc card standard (pcmcia) and jeida, providing electrical and physical compatibility. the pc card form factor offers an industry standard pinout and mechanical outline, allowing density upgrades without system design changes. wedc?s standard cards are shipped with wedc?s logo. cards are also available with blank housings (no logo). the blank housings are available in both a recessed (for label) and flat housing. please contact wedc sales representative for further information on custom artwork.
pcmcia flash memory card fla series 2 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. block diagram device type manuf id device id 28f004s5 89 h a7 h 28f008sa 89 h a2 h 28f008s5 89 h a6 h 28f016s5 89 h aa h device pair (n/2 - 1) m res device pair 1 device pair 0 v cc v cc v cc device (n-1) device 3 device 1 device 2 device 0 device (n-2) wh# wh# rh# rh# wl# wl# rl# rl# data bus q8-q15 data bus d8-d15 data bus q0-q7 data bus d0-d7 cs0 cs0 cs1 csn csn cn c0 ctrl at/reg enable control logic pcmcia interface array address bus address buffer address bus control address bus a1-a25 we# oe# ce2# ce1# reg# a0 wp sr clr reg c;r /sr /pd 4000h 0000h card management registers attrib. mem eeprom 2kb cis q0-q7 control i/o buffer
pcmcia flash memory card fla series 3 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. address register name 4100h status register 4002h con g. and status register 4000h con guration option register registers in attribute memory space* cor configuration option register: adrs = 4000h write only *cards without att. mem and fla51- fla66 do not have registers sres lreq con guration index d7 d6 d5 d4 d3 d2 d1 d0 d7 soft reset, active high 1 = reset state 0 = end reset state d6 level req (not supported) d5-d0 con guration index (not supported) csr configuration status register: adrs = 4002h write only not supported pdwn not supported d7 d6 d5 d4 d3 d2 d1 d0 d2 power down, active high 1 = place all memory devices in power down mode 0 = normal operation power on default = 0 sr status register: adrs = 4100h read only not supported sreset pdwn not supported r/bsy d7 d6 d5 d4 d3 d2 d1 d0 d5 represents the state of sreset bit in cor (4000h) 1 = reset 0 = normal operation power on default d5 = 0 d3 represents the state of power down bit (d2) in csr (4002h) 1 = power down d0 re ects the card's ready/busy signal (pin 16) driven by memory components ready/ busy outputs. this bit allows software polling of the card's ready/busy status. 1 = ready mechanical 1.0mm + 0.05 (0.039?) 1.0mm + 0.05 (0.039?) 1.6mm + 0.05 (0.063?) interconnect area 10.0mm min (0.400?) 10.0mm min (0.400?) 3.0mm min 54.0mm + 0.10 (2.126?) 85.6mm + 0.20 (3.370?) 3.3mm + t1 (0.130?) t1=0.10mm unterconnect area t1=0.20mm substrate area substrate area
pcmcia flash memory card fla series 4 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. pin signal name i/o function active 1 gnd ground 2dq 3 i/o data bit 3 3dq 4 i/o data bit 4 4dq 5 i/o data bit 5 5 dq 6 i/o data bit 6 6dq 7 i/o data bit 7 7ce 1# i card enable 1 low 8a 10 i address bit 10 9 oe# i output enable low 10 a 11 i address bit 11 11 a 9 i address bit 9 12 a 8 i address bit 8 13 a 13 i address bit 13 14 a 14 i address bit 14 15 we# i write enable low 16 rdy/bsy# o ready/busy low (4) 17 v cc supply voltage 18 v pp 1 prog. voltage nc 19 a 16 i address bit 16 20 a 15 i address bit 15 21 a 12 i address bit 12 22 a 7 i address bit 7 23 a 6 i address bit 6 24 a 5 i address bit 5 25 a 4 i address bit 4 26 a 3 i address bit 3 27 a 2 i address bit 2 28 a 1 i address bit 1 29 a 0 i address bit 0 30 dq 0 i/o data bit 0 31 dq 1 i/o data bit 1 32 dq 2 i/o data bit 2 33 wp o write potect high 34 gnd ground pin signal name i/o function active 35 gnd ground 36 cd 1# o card detect 1 low 37 dq 11# i/o data bit 11 38 dq 12 i/o data bit 12 39 dq 13 i/o data bit 13 40 dq 14 i/o data bit 14 41 dq 15 i data bit 15 42 ce 2 i card enable 2 low 43 vs 1# o voltage sense 1 nc 44 rfu reserved 45 rfu reserved 46 a 17 i address bit 17 47 a 18 i address bit 18 48 a 19 i address bit 19 49 a 20 i address bit 20 2mb(3) 50 a 21 i address bit 21 4mb(3) 51 v cc supply voltage 52 v pp 2 prog. voltage nc 53 a 22 i address bit 22 8mb(3) 54 a 23 i address bit 23 16mb(3) 55 a 24 i address bit 24 32mb(3) 56 a 25 i address bit 25 64mb(3) 57 vs 2 o voltage sense 2 nc 58 rst i card reset high (4) 59 wait o extended bus cycle low(2,4) 60 rfu# reserved 61 reg i attrib mem select 62 bvd 2# o bat. volt. detect 2 (2) 63 bvd 1 o bat. volt. detect 1 (2) 64 dq 8 i/o data bit 8 65 dq 9 i/o data bit 9 66 dq 10 o data bit 10 67 cd 2 o card detect 2 low 68 gnd# ground pinout notes: 1. rdy/bsy signal is an ?open drain? type output, pull-up resistor on host side is required. 2. wait#, bvd 1 and bvd 2 are driven high for compatibility. 3. shows density for which speci ed address bit is msb. higher order address bits are no connects (ie 4mb a21 is msb a22 - a25 are nc). 4. nc - no connection for fla51 - fla66.
pcmcia flash memory card fla series 5 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. symbol type name and function a0 - a25 input address inputs: a0 through a25 enable direct addressing of up to 64mb of memory on the card. signal a0 is not used in word access mode. a25 is the most signi cant bit dq0 - dq15 input/output data input/output: dq0 through dq15 constitute the bi-directional databus. dq15 is the msb. ce1#, ce2# input card enable 1 and 2: ce1# enables even byte accesses, ce2# enables odd byte accesses. multiplexing a0, ce1# and ce2# allows 8-bit hosts to access all data on dq0 - dq7. oe# input output enable: active low signal gating read data from the memory card. we# input write enable: active low signal gating write data to the memory card. rdy/ bsy#(*) output ready/busy output: indicates status of internally timed erase or program algorithms. a high output indicates that the card is ready to accept accesses. a low output indicates that one or more devices in the memory card are busy with internally timed erase or write activities. cd1#, cd2# output card detect 1 and 2: provide card insertion detection. these signals are internally connected to ground on the card. the host shall monitor these signals to detect card insertion (pulled-up on host side). wp output write protect: write protect re ects the status of the write protect switch on the memory card. wp set to high = write protected, providing internal hardware write lockout to the flash array.if card does not include optional write protect switch, this signal will be pulled low internally indicating write protect = ?off?. v pp 1, v pp 2 n.c. program/erase power supply: provides programming voltages for card (12v). not connected for 5v only card. v cc card power supply: (5.0v). gnd card ground reg# input attribute memory select : active low signal, enables access to attribute memory plane, occupied by card information structure and card registers. rst(*) input reset: active high signal for placing card in power-on default state. reset can be used as a power-down signal for t he memory array. wait#(*) output wait: this signal is pulled high internally for compatibility. no wait states are generated. bvd1, bvd2 output battery voltage detect: these signals are pulled high to maintain sram card compatibility. vs1, vs2 output voltage sense: noti es the host socket of the card?s v cc requirements. vs1 and vs2 are open to indicate a 5v card . rfu reserved for future use nc no internal connection to card: pin may be driven or left oating card signal description (*) signals not supported by fla51-66 (n.c) read function common memory attribute memory function mode ce 2# ce 1# a 0 oe# we# reg# d 15 -d 8 d 7 -d 0 reg# d 15 -d 8 d 7 -d 0 standby mode h h x x x x high-z high-z x high-z high-z byte access (8 bits) h l l l h h high-z even-byte l high-z even-byte h l h l h h high-z odd-byte l high-z not valid word access (16 bits) l l x l h h odd-byte even-byte l not valid even-byte odd-byte only access l h x l h h odd-byte high-z l not valid high-z write function standby mode h h x x x x x x x x x byte access (8 bits) h l l h l h x even-byte l x even-byte h l h h l h x odd-byte l x x word access (16 bits) l l x h l h odd-byte even-byte l x even-byte odd-byte only access l h x h l h odd-byte x l x x functional truth table
pcmcia flash memory card fla series 6 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. operating temperature ta (ambient) commercial 0c to +60 c industrial -40c to +85 c storage temperature commercial 0c to +60 c industrial -40c to +85 c voltage on any pin relative to v ss -0.5v to vcc+0.5v v cc supply voltage relative to v ss -0.5v to +7.0v note: (1) stress greater than those listed under ?absolute maximum ratings? may cause permanent damage to the device. this is a stress rating only and functional operation at these or any other conditions greater than those indicated in the operational sections of this speci cation is not implied. exposure to absolute maximum rating conditions for extended periods may affect reliability. absolute maximum ratings (1) symbol parameter density(mbytes) notes typ (3) max units test conditions i ccr v cc read current all 35 ma vcc = vccmax tcycle = 150ns,cmos levels i ccw v cc program current all 28f008s5 28f016s5 75 ma i ccw v cc program current all 28f008sa vpp=12v 30 ma i ppw v pp program current all 30 ma i cce v cc erase current all 100 ma i ccs (cmos) v cc standby current 2mb 2 28f008sa 110 230 a v cc = vccmax control signals = v cc reset = v ss , cmos levels 20mb 900 2mb 2 600 20mb 28f008s5 420 4mb 2 60 40mb 28f016s5 380 dc characteristics (1) cmos test conditions: v cc = 5v 5%, v il = v ss 0.2v, v ih = v cc 0.2v notes: 1. all currents are rms values unless otherwise speci ed. i ccr , i ccw and i cce are based on byte wide operations. for 16 bit operation values are double. 2. control signals: ce 1# , ce 2# , oe#, we#, reg#. 3. typical: v cc = 5v, t = +25c. symbol parameter notes min max units test conditions i li input leakage current 1 20 a v cc = v cc max v in =v cc or vss i lo output leakage current 1 20 a v cc = v cc max v out =v cc or v ss v il input low voltage 1 0 0.8 v v ih input high voltage 1 0.7v cc v cc +0.5 v v ol output low voltage 1 0.4 v i ol = 3.2ma v oh output high voltage 1 v cc -0.4 v cc vi oh = -2.0ma v lko v cc erase/program lock voltage 1 2.0 v notes: 1. values are the same for byte and word wide modes for all card densities. 2. exceptions: leakage currents on ce1, ce2, oe, reg and we will be < 500 a when v in = gnd due to internal pull-up resistors. leakage currents on rst will be <150a when v in =v cc due to internal pull-down resistor.
pcmcia flash memory card fla series 7 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. symbol (pcmcia) parameter 150ns min max unit t c (r) read cycle time 150 ns t a (a) address access time 150 ns t a (ce) card enable access time 150 ns t a (oe) output enable access time 75 ns t su (a) address setup time 20 ns t su (ce) card enable setup time 0 ns t h (a) address hold time 20 ns t h (ce) card enable hold time 20 ns t v (a) output hold from address change 0 ns t dis (ce) output disable time from ce# 75 ns t dis (oe) output disable time from oe# 75 ns t en (ce) output enable time from ce# 5 ns t en (oe) output enable time from oe# 5 ns t rec (rsr) power down recovery to output delay. v cc = 5v 500 ns ac characteristics - read timing parameters note: ac timing diagrams and characteristics are guaranteed to meet or exceed pcmcia 2.1 speci cations. read timing diagram a [25::0], reg# t c (r) ce 1# , ce 2# oe# d[15::0] t a (ce) t h (a) t su (a) note 1 data valid t a (a) t v (a) t su (ce) note 1 t a (oe) t h (ce) t en (oe) t dis (ce) t dis (oe) note: signal may be high or low in this area.
pcmcia flash memory card fla series 8 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. symbol (pcmcia) parameter 150ns unit min max t c w write cycle time 150 ns t w (we) write pulse width 80 ns t su (a) address setup time 20 ns t su (a-weh) address setup time for we# 100 ns t su (ce-weh) card enable setup time for we# 100 ns t su (d-weh) data setup time for we# 50 ns t h (d) data hold time 20 ns t rec (we) write recover time 20 ns t dis (we) output disable time from we# 75 ns t dis (oe) output disable time from oe# 75 ns t en (we) output enable time from we# 5 ns t en (oe) output enable time from oe# 5 ns t su (oe-we) output enable setup from we# 10 ns t h (oe-we) output enable hold from we# 10 ns t su (ce) card enable setup time from oe# 0 ns ac characteristics - write timing parameters note: ac timing diagrams and characteristics are guaranteed to meet or exceed pcmcia 2.1 speci cations. write timing diagram note: 1. signal may be high or low in this area. 2. when the data i/o pins are in the output state, no signals shall be applied to the data pins (d15-d0) by the host system. a [25::0], reg# t c (w) ce 1# , ce 2# oe# d[15::0](d in ) t w (we) t su (a) note 1 data input t su (a-weh) t su (ce) note 1 t rec (we) t h (ce) t su (oe-we) t h (d) t en (we) d[15::0](d out ) we# t su (ce-weh) t h (oe-we) t dis (oe) t dis (we) note 2 note 2 t su (d-weh) t en (oe)
pcmcia flash memory card fla series 9 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. data write and erase performance (1,3) v cc = 5v 5%, ta = 0c to + 70c symbol parameter notes min typ (1) max units t whqv 1 word/byte program time 4 8 s t ehqv 1 t whqv 2 block program time device sa 0.6 2.1 sec t ehqv 2 device s5 0.4 0.5 block erase time device sa 1.6 10 sec notes: 1. typical: nominal voltages and t a = 25c. 2. excludes system overhead. 3. valid for all speed options. 4. to maximize system performance rdy/bsy# signal should be polled. product marking company name part number lot code/trace number date code note: some products are currently marked with our pre-merger company name/acronym (edi). during our transition period, some products will also be marked with our new company name/acronym (wed). starting october 2000 all pcmcia products will be marked only with the wed pre x. edi wed 7p016fla6200c15 c995 9915
pcmcia flash memory card fla series 10 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. 7 p 016 fla62 00 c 15 card technology 7 flash 8 sram pc card p standard pcmcia r ruggedized pcmcia card capacity 016 16mb card family and version - see card family and version info. for details (next page) packaging option 00 standard, type 1 temperature range c = commercial 0c to +70c i = industrial -40c to +85c card access time 15 150ns 25 250ns part numbering card family and version information fla21-fla24 based on 28f008sa (requires 12v vpp for programming and erase functions) fla21 no attribute memory, no write protect fla22 with attribute memory, no write protect fla23 no attribute memory, with write protect fla24 with attribute memory, with write protect example p/n 7p004fla2200c15 fla25-fla28 based on 28f008s5 for 5v only applications fla25 no attribute memory, no write protect fla26 with attribute memory, no write protect fla27 no attribute memory, with write protect fla28 with attribute memory, with write protect example p/n 7p004fla2600c15 fla29-fla32 based on 28f016s5 for 5v only applications fla29 no attribute memory, no write protect fla30 with attribute memory, no write protect fla31 no attribute memory, with write protect fla32 with attribute memory, with write protect example p/n 7p004fla3000c15 fla33-fla36 based on 28f004s5 for 5v only applications fla33 no attribute memory, no write protect fla34 with attribute memory, no write protect fla35 no attribute memory, with write protect fla36 with attribute memory, with write protect example p/n 7p004fla3600c15 fla51-fla54 based on 28f008sa ; the same as fla21-fla24 with exception: - no registers - signals rst, rdy/bsy, wait are not connected fla51 no attribute memory, no write protect fla52 with attribute memory, no write protect fla53 no attribute memory, with write
pcmcia flash memory card fla series 11 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. xxx 002 1) 2mb 018 1) 18mb 004 4mb 020 20mb 006 1) 6mb 024 2) 24mb 008 8mb 028 2) 28mb 010 1) 10mb 032 2) 32mb 012 12mb 036 2) 36mb 014 1) 14mb 040 2) 40mb 016 16mb 1) available only for fla21-fla24, fla25-fla28, fla51-fla54, and fla55-fla59 2) available only for fla29-fla32 and fla59-fla62 flayy card family and version (see card family and version information) ss 00 wedc logo silkscreen 01 blank housing, type i 02 blank housing, type i recessed t c = commercial 0c to +70c i** = industrial -40c to +85c zz 15 150ns notes: options without attribute memory and with hardware write protect switch are available. ** denotes advanced information. protect fla54 with attribute memory, with write protect example p/n 7p004fla5200c15 fla55-fla58 based on 28f008s5 ; the same as fla25- fla28 with exception: - no registers - signals rst, rdy/bsy, wait are not connected fla55 no attribute memory, no write protect fla56 with attribute memory, no write protect fla57 no attribute memory, with write protect fla58 with attribute memory, with write protect example p/n 7p004fla5600c15 fla59-fla62 based on 28f016s5; the same as fla29- fla32 with exception: - no registers - signals rst, rdy/bsy, wait are not connected fla59 no attribute memory, no write protect fla60 with attribute memory, no write protect fla61 no attribute memory, with write protect fla62 with attribute memory, with write protect example p/n 7p004fla6000c15 fla63-fla66 based on 28f004s5 ; the same as fla33- fla36 with exception: - no registers - signals rst, rdy/bsy, wait are not connected fla63 no attribute memory, no write protect fla64 with attribute memory, no write protect fla65 no attribute memory, with write protect fla66 with attribute memory, with write protect example p/n 7p004fla6600c15 ordering information 7p xxx flayy ss t zz
pcmcia flash memory card fla series 12 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. address value description 44h 49h i 46h 37h 7 48h 50h p 4ah 30h 0 4ch x 4eh x 50h 46h f 52h 4ch l 54h 41h a 56h 58h 32h 32h 2 based on 28f008sa 2 with att. mem. no wp 32h 36h 2 based on 28f008s5 6 with att. mem. no wp 33h 30h 3 based on 28f016s5 0 with att. mem. no wp 5ah 2dh - 5ch 2dh - 5eh 2dh - 60h 31h 1 62h 35h 5 64h 20h space 66h 00h end text 68h 43h c 6ah 4fh o 6ch 50h p 6eh 59h y 70h 52h r 72h 49h i 74h 47h g 76h 48h h 78h 54h t 7ah 20h space 66h 00h end text 68h 43h c 6ah 4fh o 6ch 50h p 6eh 59h y 70h 52h r 72h 49h i 74h 47h g 76h 48h h 78h 54h t 7ah 20h space 7ch 45h e 7eh 4ch l 80h 45h e 82h 43h c 84h 54h t address value description 00h 01h cistpl_device 02h 03h tpl_link 04h 53h flash = 150ns (device writable) 06h 06h 0eh 16h 1eh 26h 2eh 36h 3eh 46h 4eh 5eh 6eh 7eh 8eh 9eh card size: 2mb 4mb 6mb 8mb 10mb 12mb 14mb 16mb 18mb 20mb 24mb 28mb 32mb 36mb 40mb 08h ffh end of device 0ah 18h cistpl_jedec_c 0ch 02h tpl_link 0eh 89h intel - id 10h a2h a6h aah intel 28f008sa - id intel 28f008s5 - id intel 28f016s5 - id 12h 17h cistpl_device_a 14h 03h tpl_link 16h 42h eeprom - 200ns 18h 01h device size = 2kbytes 1ah ffh end of tuple 1ch 1eh cistpl_devicegeo 1eh 06h tpl_link 20h 02h dgtpl_bus 22h 11h dgtpl_ebs 24h 01h dgtpl_rbs 26h 01h dgtpl_wbs 28h 01h dgtpl_part 2ah 01h flash device non-interleaved 2ch 20h cistpl_manfid 2eh 04h tpl_link(04h) 30h f6h edi tplmid_manf: lsb 32h 01h edi tplmid_manf: msb 34h 00h lsb: number not assigned 36h 00h msb: number not assigned 38h 15h cistpl_vers1 3ah 47h tpl_link 3ch 05h tpllv1_major 3eh 00h tpllv1_minor 40h 45h e 42h 44h d cis information for fla series cards
pcmcia flash memory card fla series 13 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. cis information for fla series cards (cont.) address value description 86h 52h r 88h 4fh o 8ah 4eh n 8ch 49h i 8eh 43h c 90h 20h space 92h 44h d 94h 45h e 96h 53h s 98h 49h i 9ah 47h g 9ch 4eh n 9eh 53h s a0h 20h space a2h 49h i a4h 4eh n a6h 43h c a8h 4fh o aah 52h r ach 50h p aeh 4fh o b0h 52h r b2h 41h a b4h 54h t b6h 45h e b8h 44h d bah 20h space bch 00h end text beh 31h 1 c0h 39h 9 c2h 39h 9 c4h 37h 7 c6h 00h end text c8h ffh end of list cah 1ah cistpl_conf cch 05h tpl_link ceh 01h tpcc_sz d0h 00h tpcc_last d2h 00h tpcc_radr d4h 40h tpcc_radr d6h 03h tpcc_rmsk d8h 00h null control tuple dah ffh cistpl_end dch 00h invalid address the shaded area (addresses beh c0h c2h c4h) can be different. it represents the year of introducing the version of the card.
pcmcia flash memory card fla series 14 white electronic designs corporation ? (602) 437-1520 ? www.whiteedc.com white electronic designs july 2007 rev. 6 white electronic designs corp. reserves the right to change products or speci cations without notice. document title pcmcia flash memory card fla series revision history rev # history release date status rev 0 initial release april 2007 final rev 6 1.0 update absolute maximum ratings commercial temperature to 0c to +60 c from 30c to +80 c july 2007 final

▲Up To Search▲

Price & Availability of 7P012FLA312I15

	To Download 7P012FLA312I15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .